SERVICES

Here is the Main H2 List

Male connector 

A male connector is a fitting that has a threaded end that can be screwed into a female port or fitting. This type of fitting is commonly used to connect a tube or pipe to a valve or other component.

Female connector

A female connector is a fitting that has a threaded port that can accept a male connector or other fitting. This type of fitting is commonly used to connect a tube or pipe to a valve or other component.

Elbow

An elbow is a fitting that is used to change the direction of a tube or pipe. Elbows are available in different angles, such as 45 or 90 degrees, and can be used to make a bend in a piping system.

Tee

 A tee is a fitting that is used to create a branch in a piping system. Tees are available in different configurations, such as equal or reducing, and can be used to connect multiple tubes or pipes together.

Cross

A cross is a fitting that is used to create a branch in a piping system in a perpendicular direction. Crosses are similar to tees but have a fourth port that is perpendicular to the other three.